If you’re a jewellery designer or emerging brand considering outsourcing production for the first time, two questions usually arise first.
"How much will it cost to develop my collection?"
"And how long will my collection take to manufacture?"
Thai Design is a family-owned jewellery manufacturing partner for growing brands, and for more than 50 years we’ve supported businesses through the processes of founding their brands, developing and producing their products, and ultimately scaling and evolving sustainably.
This guide brings together the answers from a two-part episode in our Jewellery Manufacturing Foundations series on YouTube, so you can plan your first collection with realistic expectations.
The short
answer: Here, development
is priced per design, with a £1,500 development deposit typically charged
upfront to cover around eight designs. Most collections move from concept to
delivery in two to three months; with four to six weeks for development and a
further four to six weeks for production.
|
At a glance |
Typical figure at Thai Design |
|
CAD design |
£30–£60 per design |
|
3D resin print |
£10–£30 per design |
|
Silicone or rubber mould |
£10–£30 per mould |
|
Development deposit |
£1,500 (covers all of the above for roughly eight designs) |
|
Development time |
4–6 weeks |
|
Production time |
4–6 weeks |
|
Minimum order |
20 pieces in sterling silver, 5 in solid gold; no minimum spend |
How much does it cost to develop a jewellery collection?

Jewellery development is everything that happens before your design is ready for production. It follows four key cost stages: CAD, master model, mould and sample. Each is priced per design, according to its specifications and complexity.
1. CAD design (£30–£60 per design)
Computer-aided design (CAD) produces the digital 3D model that every later stage is built on. It offers precision, realistic previews and easy adjustments before any metal is cast. Our in-house CAD designer can meet you where you are: Working from a rough idea, a hand sketch or a detailed technical drawing. Alternatively, if you already have a CAD file ready to go, we can start there and save time.

2. 3D resin print (£10–£30 per design)
Once you approve the CAD, we use our high-spec 3D printer to print it in resin, layer by layer, on site. This physical prototype allows you to see and handle your design in three dimensions, enabling us to make an accurate weight estimate for pricing.

3. Master model and moulds (£10–£30 per mould)
Some designs need a master model; many do not. We’ll tell you upfront what your project requires. When a master is needed, we create a silicone mould from the resin print, cast the master, then cut a rubber casting mould from it. Otherwise, we create a silicone mould directly from the 3D resin. The master model's cost depends on the design's size, weight and intricacy. Pieces with several components may need separate moulds, which adds to the total.

4. Your first finished sample
The sample is the benchmark piece you hold, inspect and approve before production begins. Its cost – and the overall cost of development - depends on a number of factors: the number of components, the level of detail, weight and dimensions, your choice of metal and gemstones, and any plating, including its thickness in microns. Naturally, a simple silver band ring costs less to model than a solid gold piece with multiple gemstones, fine detailing or moving parts.

The development deposit, minimum orders and confidentiality

Before any CAD work begins, we review your designs and specifications with you and provide an estimated quotation to help you manage your budget and expectations. Only then does sample development start.
To begin, we ask for an upfront development deposit of £1,500 to cover CAD files, moulds, master models, finished samples and any additional custom tooling required along the way. It also protects the materials and labour that we commit from day one. Upfront development deposits are standard practice among jewellery manufacturers. In our experience, £1,500 covers roughly eight designs, depending on the scope of your project. Any unused balance stays in your account, held by your dedicated Sales Account Manager for future developments.
Once your designs are developed, there is no minimum order spend. Our minimum order quantities are deliberately low: 20 pieces per design in sterling silver, or just five per design in solid gold.
We’re also happy to sign a legally binding non-disclosure agreement (NDA). Your designs, your brand and everything you share with us stay confidential, and every design we develop is produced exclusively for you.
How long does jewellery manufacturing take?

Most
jewellery collections move from initial concept to delivery in two to three
months. These are averages, and where your project falls in that range depends
on your design and on communication.
Development: 4–6 weeks
The development stage entails everything from your first idea to an approved sample, through CAD, resin print, and mould. We invite you to review every stage, and we never move forwards without your approval. That care and attention to detail is what realises your vision as a finished piece of jewellery, and detailed specifications also help us to quote you accurately on price and timing.
Production: 4–6 weeks
Once your sample is signed off, production begins. Every step is managed under one roof at our facility in Chiang Mai: casting or stamping, filing, soldering, plating, polishing, engraving, stone-cutting, stone-setting and inlay. Keeping everything in-house removes hand-offs between businesses and the delays they cause, whilst enabling us to practice consistent quality control checks at every stage.
Three factors that affect your lead time
- Revisions. Each round of changes to a
sample, such as tweaked proportions or amended finishing, adds to the lead
time. Detailed briefs and honest feedback from the outset keep things
moving.
- Material availability. Some gemstones and unusual
components take longer to source. With gold and silver prices currently
very high, you may want to revisit carat weight or plating mid-development
to manage costs. All of these amendments are manageable, but the earlier
they’re raised the better equipped we are to stay on track.
- Order quantity. Larger runs take longer. If you’re just starting out, our low minimum order quantities invite you to start with a modest first order rather than committing to a large batch.
How to plan your jewellery manufacturing timeline

We encourage you to include timing in your very first conversation with your manufacturing partner, instead of treating it as an afterthought. If you share your target date, order quantities and material preferences early, we can help you to plan around them. Then, throughout development and production, your Sales Account Manager will send you live progress updates, so you’re never left waiting in the dark.
For more complex and in-depth questions about capacity planning, you might benefit from a 1:1 consultation with one of our owners. With more than 30 years of combined jewellery business experience, Kim and Kelly have navigated almost every facet of the trade: from design and production to finances and operational strategy. Just one conversation could help you to schedule realistically and implement a system that enables your business to grow sustainably.
The Thai Design 1:1 Consultancy
Ready to start your first collection? Whether you’re armed with a finished CAD file or your vision is simply an image in your mind’s eye, our skilful team in Chiang Mai is ready to help you realise it as a high-quality piece of jewellery. Contact a Thai Design Sales Account Manager to talk through your designs and receive a tailored quote and timeline, or start with a private business consultation.
Watch the mini-series
See both stages explained in more detail in our Jewellery Manufacturing Foundations series:
Part 1: How Much Does it Cost to Develop a Jewellery Collection?
Frequently asked questions
How much does jewellery CAD design cost? At Thai Design, custom CAD files typically cost £30–£60 per design, depending on complexity.
What is the minimum order for jewellery manufacturing in Thailand? Thai Design's minimums are 20 pieces per design in sterling silver and five in solid gold, with no minimum order spend.
How long does it take to manufacture a jewellery collection? Typically two to three months: four to six weeks for development and four to six weeks for production.
Will my designs be kept confidential? Yes. Thai Design signs a legally binding NDA, and every design is produced exclusively for you.